Allied Telesis AT-S62 - Manual (Page 243)

AT-S62 Web Browser Interface User’s Guide
Section III: SNMPv3 Operations 243
Displaying Target
Address Table
Entries
To display entries in the SNMPv3 Target Address Table, perform the
following procedure.
1. From the Home Page, select Monitoring.
2. Select the Mgmt Protocols menu selection.
3. Select the SNMP Tab.
4. From the SNMP Monitoring Tab, click the circle next to View Target
Address Table.
5. Click View at the bottom of the page.
The Monitoring, SNMPv3 Target Address Table Page is shown in
Figure 88.
Figure 88 Monitoring, SNMPv3 Target Address Table Page