Allied Telesis AT-S62 - Manual (Page 23)

AT-S62 Web Browser Interface User’s Guide
Section I: Basic Operations 23
Saving Your Parameter Changes
When you make a change to a switch parameter, the change is, in most
cases, immediately activated as soon as you click the Apply button.
However, a change to a switch parameter is initially saved only to
temporary memory and will be lost the next time you reset or power
cycle the unit. To permanently save a change, you must click the Save
Config button, shown in Figure 4. This updates the switch’s active
configuration file. A change that is saved to the configuration file is
retained even when the unit is powered off or reset. If the button is not
visible in the menu, there are no changes for the switch to save.
Figure 4 Save Config Button
Save Config
Button