Boonton 4500B Peak Power Meter - Manual (Page 87)

Boonton 4500B RF Peak Power Analyzer
Operation 4-15
Table 4-2. Chan # > Menu (continued)
Menu Item Function
(Type) Selections (SCPI cmd)
Vert. Center Linear
Pulse, Mod & Stat Sets the power level at the vertical center of the display
(Numeric) Continuous Range:
Use this control to shift the waveform display vertically to the
desired position in the window. Press the Chan 1 > Vert Center
menu key to activate this window. Then use the keypad to shift the
vertical center of the display to the desired power level. Increasing
the power level moves the waveform down; decreasing the power
level moves it up.
DISPlay:TRACe[1|2|3|4|5|6|7]:VCENTer (linear units)
Calibration
Pulse, Mod & Stat Accesses the Chan 1 > Calibration > submenu. See Table 4-3.
(Submenu) MENU
Extensions
Pulse, Mod &Stat Accesses the Chan 1 > Extensions > submenu. See Table 4-4,
(Submenu) MENU 4-4A and 4-4B.