Boonton 4500B Peak Power Meter - Manual (Page 301)

Boonton 4500B RF Peak Power Analyzer
Remote Operation 5-101
Table 5-1. SCPI COMMAND SUMMARY (continued)
DISPlay:TRACe:MKCENTer
Change vertical center to value where active marker crosses waveform
DISPlay:TRACe:PDFBars
PDF bars. = 1, 2, 5, 10, 20, 35
DISPlay:TRACe[1|2|3|4|5|6|7]:TYPE
Set trace type to selected representation. = POINTS, LINES, OFF
DISPlay:TRACe[1|2|3|4|5|6|7]:VCENTer Change vertical center based on current units. Ex: = 1.23
DISPlay:TRACe[1|2|3|4|5|6|7]:VSCALe Change vertical scale based on current units. Ex: = 20 set to
20dB/div (current units)
DISPlay:TSPAN
Set/return horizontal time span. Ex: = 0.05 (50 ms)
FETCh[1|2|3|4|6|7]:ARRay:AMEAsure:POWer?
Return current Ppeak, Pavgcyc, Pavgpulse, Ptop, Pbot,
Overshoot
FETCh[1|2|3|4|6|7]:ARRay:AMEAsure:STATistical?
Return current Pavg, Ppeak, Pmin, Pk/Avg, Pmrk1,
Pmrk2, PCTmrk1, PCTmrk2, Tot(Msamples)
FETCh[1|2|3|4|6|7]:ARRay:AMEAsure:TIMe?
Return current Freq, Period, Width, Offtime, Dcyc,
Risetime, Falltime
FETCh[1|2|3|4|6|7]:ARRay:CW:POWer?
Return current Pavg, Pmax, Pmin, Ppulse or PK/AVG
FETCh[1|2|3|4|6|7]:ARRay:MARKer:POWer?
Return current Pavg, Pmax, Pmin, P/Avg, Pmrk1,
Pmrk2, Pmrk1/Pmrk2
FETCh:ARRay:MARKer:WINDow?
Return current reading at MK1, MK2, and center window.
FETCh:ARRay:TEMPerature:AVERage?
Return CH1 flag, avg_temp1, CH2 flag, avg_temp2 in tenths
of a deg C
FETCh:ARRay:TEMPerature:CALTemp?
Return CH1 flag, acal_temp1, CH2 flag, acal_temp2 in tenths
of a deg C
FETCh:ARRay:TEMPerature:CURRent?
Return CH1 flag, temp1, CH2 flag, temp2 in deg C
FETCh[1|2|3|4|5|6|7]:CW:POWer?
Return current average reading in power units
FETCh[1|2|3|4|5|6|7]:INTERval:AVERage?
Return average power between MK1 and MK2.
FETCh[1|2|3|4|6|7]:INTERval:MAXimum?
Return maximum instantaneous power between MK1 and MK2.
FETCh[1|2|3|4|6|7]:INTERval:MINimum?
Return minimum instantaneous power between MK1 and MK2.
FETCh[1|2|3|4|6|7]:INTERval:MAXFilt?
Return maximum filtered power between MK1 and MK2.
FETCh[1|2|3|4|6|7]:INTERval:MINFilt?
Return minimum filtered power between MK1 and MK2.