Boonton 4500B Peak Power Meter - Manual (Page 23)

Boonton 4500B RF Peak Power Analyzer
General Information 1-7
Table 1-2 Model 4500B Performance Specifications
(Specifications are subject to change without notice)
SENSOR INPUTS
(performance specifications are sensor model dependent)
RF Frequency Range:
1 MHz to 40 GHz
Pulse Measurement Range: -40 to +20 dBm
Modulated Measurement Range: -50 to +20 dBm
Relative Offset Range: ±99.99 dB
Vertical Scale:
Logarithmic 0.1 to 50 dBm/div in 1-2-5 sequence
0.1 to 50 dBV/div in 1-2-5 sequence
0.1 to 50 dBmV/div in 1-2-5 sequence
0.1 to 50 dBuV/div in 1-2-5 sequence
Linear 1 nW/div to 50 MW/div in 1-2-5 sequence
1 nV/div to 50 MV/div in 1-2-5 sequence
Rise time: <3 nsec
Single-Shot Bandwidth: 5 MHz (based on 10 samples per pulse)
Pulse Repetition Rate: 50 MHz max
Minimum Pulse Width: 6 nsec
TIME BASE
Time Base Range:
5 nsec/div to 1 hr/div
Time Base Accuracy: 0.01%
Time Base Resolution: 100 psec
Time Base Display: Sweeping or Roll Mode
X-AXIS (Statistical)
Scale:
Linear or Logarithmic, 1 to 7 cycles
Linear Ranges: 0.1%/div to 10%/div
Linear Offset: 0 to 99.9%, 0.1% resolution
Log Range: 1e-9% to 100%
TRIGGER
Trigger Source:
Channel 1 (internal)
Channel 2 (internal, with optional channel 2)
External Trigger 1
External Trigger 2 (with optional channel 2)
Trigger Slope:
+ or –
Trigger Delay Range:
Time Base Setting Delay Range; pre trig (-), post trig (+)
5 nsec to 500 nsec -4 msec to +100 msec
1 usec to 10 msec 4000 divisions
20 msec to 3600 sec -40 to +100 sec