Boonton 4500B Peak Power Meter - Manual (Page 265)

Boonton 4500B RF Peak Power Analyzer
Remote Operation 5-65
REFLine:TRACk
Description: Controls the automatic tracking of waveform parameters using reference lines. The reference lines
must be assigned to the measurement channel of interest. For CHM, MEM1 and MEM2, only the
marker tracking function X1X2 is available.
Syntax: REFLine:TRACk
Argument = {OFF, X1X2, TOPBOT, DISTMESIAL, DISTPROX}
OFF No tracking. Reference lines have static positions
X1X2 Reference lines track the intersections, respectively, of Marker 1 and Marker 2
with the assigned channel‘s waveform.
TOPBOT Reference lines track the Top and Bottom level of the assigned channel‘s
waveform.
DISTMESIAL Reference lines track the Distal and Mesial level of the assigned channel‘s
waveform.
DISTPROX Reference lines track the Distal and Proximal level of the assigned channel‘s
waveform
The terms Top Level, Bottom Level, Distal, Proximal and Mesial level are those set in the Pulse
Definitions menu (or by GPIB command) and refer to the IEEE Definitions of Pulse parameters.
Valid Modes: Pulse mode.