System:communicate:serial:bits, System:communicate:serial:ctrl:rts, System:communicate:serial:parity – Boonton 4500B Peak Power Meter User Manual

Page 282: System:communicate:serial:sbits, System:communicate:serial:xon, System:communicate:serial:bits -82, System:communicate:serial:ctrl:rts -82, System:communicate:serial:parity -82, System:communicate:serial:sbits -82, System:communicate:serial:xon -82

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-82

SYSTem:COMMunicate:SERial:BITS

Description:

Set or return the number of serial bits per byte.

Syntax:

SYSTem:COMMunicate:SERial:BITS

Argument:

= 7, 8

Valid Modes:

Any

SYSTem:COMMunicate:SERial:CTRL:RTS

Description:

Set or return the serial handshake control mode.

Syntax:

SYSTem:COMMunicate:SERial:CTRL:RTS

Argument:

= NONE, RTS, CTS, RTS&CTS

Valid Modes:

Any

SYSTem:COMMunicate:SERial:PARity

Description:

Set or return the condition for setting the serial parity bit.

Syntax:

SYSTem:COMMunicate:SERial:PARity

Argument:

= NONE, ODD, EVEN

Valid Modes:

Any

SYSTem:COMMunicate:SERial:SBITs

Description:

Set or return the number of serial stop bits per byte.

Syntax:

SYSTem:COMMunicate:SERial:SBITs

Argument:

= 1, 2

Valid Modes:

Any

SYSTem:COMMunicate:SERial:XON

Description:

Set or return the state of character based handshake control for the serial port.

Syntax:

SYSTem:COMMunicate:SERial:XON

Argument:

= OFF, ON

Valid Modes:

Any