Boonton 4500B Peak Power Meter - Manual (Page 304)

Boonton 4500B RF Peak Power Analyzer
Remote Operation 5-104
Table 5-1. SCPI COMMAND SUMMARY (continued)
OUTPut:PULSe:CTRL
Set/return pulse control. = PRESET, VAR
OUTPut:PULSe:DCYCle Set/return duty cycle. = 10, 20, 30, 40, 50
OUTPut:PULSe:PERWID Set/return variable calibrator pulse period and pulse width.
= 28e-6 to 131.07e-3 = 7e-6 to 65.535e-3
OUTPut:PULSe:PERiod
Set/return preset calibrator pulse period in millseconds. = 0.1, 1, 10
OUTPut:PULSe:SOURce
Set/return calibrator pulse modulation source. = INT, EXT
OUTPut:SIGnal
Set/return state of calibrator RF output. = ON, OFF
OUTPut:TRIGout[1/2]:SOURce
Set/return signal source for trigger output. = CH1/2, TRIG1/2, SWP, CLK
OUTPut:TRIGout[1/2]:POLarity
Set/return trigger output polarity. = POS, NEG
READ[1|2|3|4|6|7]:ARRay:AMEAsure:POWer?
Return new Ppeak, Pavgcyc, Pavgpulse, Ptop, Pbot, Overshoot
READ[1|2|3|4|6|7]:ARRay:AMEAsure:STATistical? Return new Pavg, Ppeak, Pmin, Pk/Avg, Pmrk1, Pmrk2,
PCTmrk1, PCTmrk2, Tot(Msamples)
READ[1|2|3|4|6|7]:ARRay:AMEAsure:TIMe?
Return new Freq, Period, Width, Offtime, Dcyc, Risetime, Falltime,
EdgeDly, Skew
READ[1|2|3|4|6|7]:ARRay:CW:POWer?
Return new Pavg, Pmax, Pmin, Ppulse or PK/AVG
READ[1|2|3|4|6|7]:ARRay:MARKer:POWer?
Return current Pavg, Pmax, Pmin, P/Av, Pmrk1, Pmrk2, Pmrk1/Pmrk2
READ:ARRay:MARKer:WINDow?
Return current reading at MK1, MK2, and center window.
READ[1|2|3|4|5|6|7]:CW:POWer?
Return new average reading in power units
READ[1|2|3|4|5|6|7]:INTERval:AVERage?
Return average power between MK1 and MK2.
READ[1|2|3|4|6|7]:INTERval:MAXimum?
Return maximum instantaneous power between MK1 and MK2.
READ[1|2|3|4|6|7]:INTERval:MINimum?
Return minimum instantaneous power between MK1 and MK2.
READ[1|2|3|4|6|7]:INTERval:MAXFilt?
Return maximum filtered power between MK1 and MK2.
READ[1|2|3|4|6|7]:INTERval:MINFilt?
Return minimum filtered power between MK1 and MK2.
READ[1|2|6|7]:INTERval:PKAVG?
Return peak to average power between MK1 and MK2.
READ[1|2|3|4|5|6|7]:MARKer[1|2]:AVERage?
Return current reading at the specified marker.
READ[1|2|3|4|5|6|7]:MARKer:DELTa?
Return difference between MK2 and MK1.
READ[1|2|3|4|6|7]:MARKer[1|2]:MAXimum?
Return maximum reading at the specified marker
READ[1|2|3|4|6|7]:MARKer[1|2]:MINimum?
Return minimum reading at the specified marker