Output:pulse:period, Output:pulse:perwid, Output:pulse:source – Boonton 4500B Peak Power Meter User Manual

Page 256: Output:signal, Output:pulse:period -56, Output:pulse:perwid -56, Output:pulse:source -56, Output:signal -56, Boonton 4500b rf peak power analyzer, Remote operation

Boonton 4500B RF Peak Power Analyzer

Remote Operation

5-56

OUTPut:PULse:PERiod

Description:

Set or return the pulse period in the Preset pulse control mode of the internal 1 GHz calibrator.
This parameter has no effect in the Variable pulse control mode External pulse source mode.

Syntax:

OUTPut:PULse:PERiod

Argument:

= {10e-3, 1e-3, 100e-6} seconds, or

{10ms, 1ms, 0.1ms}, or

{10000us, 1000us, 100us}

Valid Modes:

1 GHz Calibrator Preset Pulse control Mode

OUTPut:PULse:PERWID

Description:

Set or return the pulse period and pulse width in seconds in the Variable pulse
control mode of the internal 1 GHz calibrator. This parameter has no effect in the Preset pulse
control mode or the External pulse source mode.

Syntax:

OUTPut:PULse:PERWID sp

Argument:

= 28e-6 to 131.07e-3 (Pulse period)

= 7e-6 to 65.535e-3 (Pulse width)

Valid Modes:

Any

OUTPut:PULse:SOURce

Description:

Set or return the pulse modulation source for the internal 1 GHz calibrator. If set to INT, the
internal pulse generator is used. EXT selects the signal from the calibrator‘s rear-panel EXT
PULSE input. Note this input requires TTL compatible signal levels.

Syntax:

OUTPut:PULse:SOURce

Argument:

= {INT, EXT}

Valid Modes:

Any

OUTPut:SIGNal

Description:

Set or return the on/off state of the internal 1 GHz calibrator‘s output signal.

Syntax:

OUTPut:SIGNal

Argument:

= {OFF, ON}

Valid Modes:

Any.