Boonton 4500B Peak Power Meter - Manual (Page 236)

Boonton 4500B RF Peak Power Analyzer
Remote Operation 5-36
FETCh:ARRay:TEMPerature:CALTemp?
Description: Return the internal temperature of the Channel 1 and Channel 2 peak power sensors at the at the
time of autocalibration. Note: If a non-temperature compensated peak sensor is in use, the 4500B
displays a warning message if the temperature has drifted more than 4C from the autocal
temperature.
Syntax: FETCh:ARRay:TEMPerature:CALTemp?
Returns: CC1, Sensor1 AutoCal Temp in degrees C, CC2, Sensor2 AutoCal Temp in degrees C
Where CC1 and CC2 are the measurement condition codes.
Valid Modes: All
FETCh:ARRay:TEMPerature:CURRent?
Description: Return the current internal temperature of the Channel 1 and Channel 2 peak power sensors. Note:
If a non-temperature compensated peak sensor is in use, the 4500B displays a warning message if
the temperature has drifted more than 4C from the autocal temperature.
Syntax: FETCh:ARRay:TEMPerature:CURRent?
Returns: CC1, Sensor1 Temp in degrees C, CC2, Sensor2 Temp in degrees C
Where CCn is the measurement condition code.
Valid Modes: All
FETCh:CW:POWer?
Description: Return current average amplitude reading in channel units.
Syntax: FETCh[1|2|3|4|5|6|7]:CW:POWer?
Returns: CC, average power (watts, dBm) or average voltage (volts, dBv)
Where CC is the measurement condition code.
Valid Modes: Modulated and Statistical modes.
FETCh:INTERval:AVERage?
Description: For the specified channel, return the average power or voltage between marker 1 and marker 2.
The units will be the same as the specified channel.
Syntax: FETCh[1|2|3|4|5|6|7]:INTERval:AVERage?
Returns: CC, average power or voltage between markers
Where CC is the measurement condition code.
Valid Modes: Pulse and Modulated