Boonton 4500B Peak Power Meter - Manual (Page 335)

Boonton 4500B RF Peak Power Analyzer
Maintenance 7-3
7.6 Test Equipment
Table 7-1 lists the equipment required to test and calibrate the Model 4500B. Any substitutions for
the recommended test equipment may require you to modify the procedures provided in this
subsection.
Table 7-1. Verification Test Equipment
Test Equipment Description
Calibrator Frequency
Agilent Model 53181A Frequency Counter
Calibrator Linearity
Agilent EPM Series Power Meter
Agilent Model 8481A NIST Certified Power Sensor (0.01 to 18 GHz)
15 dB Type N Precision Attenuator
Calibrator External Pulse Input
Agilent/Hewlett-Packard 8012B Pulse Generator
Calibrator 0 dBm Output Power
Agilent Model 432A Analog Power Meter
Agilent Model 8478B NIST Certified Thermistor Mount (0.01 to 18 GHz)
Agilent Model 34401A Multimeter
Sensor Return Loss to 18 GHz
Anritsu Model 54147A (or 54169A) Scalar Network Analyzer
Anritsu Model 560-97NF50-1 SWR Autotester (0.01 to 18 GHz)
Anritsu Model 22N50 Open/Short (0.01 to 18 GHz)
Sensor Return Loss to 40 GHz Anritsu Model 54169A Scalar Network Analyzer
Anritsu Model 560-98KF50 SWR Autotester (0.01 to 40 GHz)
Anritsu Model 22K50 Open/Short (0.01 to 40 GHz)
Anritsu Model 41KC-6 6dB Attenuator (0.5 to 40 GHz)
Sensor Calibration Factor to 18 GHz
Tegam System IIA Power Meter Calibration System (.01 to 18 GHz).
Agilent Model E8257C Signal Generator
Sensor Calibration Factor to 40 GHz
Anritsu Model 54169A Scalar Network Analyzer
Anritsu Model 560-98KF50 SWR Autotester (0.01 to 40 GHz)
Anritsu Model 22K50 Open/Short (0.01 to 40 GHz)
Anritsu Model 41KC-6 6-dB Attenuator (0.5 to 40 GHz)
Agilent EPM Series Power Meter
Agilent 8487 NIST Certified Power Sensor with 11904D 2.4 mm (f) to
K-Connector® (m) adapter (0.05 to 40 GHz)
GPIB Bus
PC GPIB (IEEE-488) Controller (e.g. National Instruments Measurement &
Automation Explorer or NI VISA Interactive Control).