HP Integrity NonStop H-Series - Manual (Page 74)

Shift-F2 Submit changes ___
F16 Return to main TMI menu ___
Update Target Volume Usage
2 and press F1 Select Volume Maintenance ___
$DSMSCM Enter one or more scratch volume names ___
Shift-F2 Submit changes ___
F16 Return to main TMI menu ___
Set Operator Security
3 and press F1 Select Select Security Maintenance ___
1 and press F1 Select Operator Security Maintenance ___
authorized-DSM-user or
alias123
Enter an operator user ID or alias to add ___
All set to yes Set the DSM/SCM tasks the operator can perform ___
F7 Add operator ___
Shift-F16 After all operators are added, return to main TMI menu ___
Set Target Database Administrator Security
3 and press F1 Select Security Maintenance. ___
2 and press F1 Select Database Administrator Security Maintenance ___
authorized-DSM-user or
alias123
Enter a target database administrator user ID or alias to add ___
All set to yes Set the DSM/SCM tasks the target database administrator can perform ___
F7 Add target database administrator ___
F16 After all administrators are added, return to main TMI menu ___
Shift-F16 Exit TMI ___
Task 4: Modify Profile Information for the Logical Target
For more information, refer to “Target Profile” (page 149) .
Task 5: Initialize the Logical Target on the Host System
Initialize the logical target on the host system after running INITENV with the Initialization option.
In NonStop Software Essentials, use the Initialize Target action, located under
“Target Maintenance
Actions” (page 64) .
Task 6: Receive Software
Receiving software comprises reading software and placing it in the archive. HP highly recommends
that you use the same RVU and related SPRs that were used to build the current operating system.
To receive the software into the archive, see
“Receiving Software Into the Archive” (page 79) .
74 Configuring the NonStop Software Management Environment