HP Integrity NonStop H-Series - Manual (Page 207)

-> START LIF LAN03
-> EXIT
Task 10: Configure and Start TCP/IP
Configure and start TCP/IP and its associated processes:
1. From a TACL prompt:
> RUN $SYSTEM.SYS00.TCPIP/NAME $ZTC00, TERM $ZHOME, NOWAIT,
PRI 180, CPU 0/1
> ADD DEFINE = TCPIP^PROCESS^NAME, FILE $ZTC00
> PARAM TCPIP^PROCESS^NAME $ZTC00
> PARAM ZTNT^TRANSPORT^PROCESS^NAME $ZTC00
2. In SCF:
-> ASSUME PROCESS $ZTC00
-> ALTER, HOSTNAME "CHINOOK_LAN00.TANDEM.COM"
-> ADD SUBNET #SN1, TYPE ETHERNET, IPADDRESS 172.17.22.128,
DEVICENAME LAN00
-> ALTER SUBNET #SN1, SUBNETMASK %Hffffff00
-> ALTER SUBNET #LOOP0, IPADDRESS 127.1
-> START SUBNET *
-> ADD ROUTE #GW, DESTINATION 0, GATEWAY 172.17.22.1,
DESTTYPE BROADCAST
-> START ROUTE *
-> EXIT
3. From a TACL prompt:
> RUN $SYSTEM.SYS00.LISTNER/NAME $ZPT00, IN
$ZHOME, OUT $ZHOME, TERM $ZHOME, NOWAIT, PRI 160,
CPU 0/$SYSTEM.ZTCPIP.PORTCONF
> RUN $SYSTEM.SYS00.TELSERV/NAME $ZTN00, TERM $ZHOME,
NOWAIT, PRI 160, CPU 0/1
> RUN $SYSTEM.ZRPC.PORTMAP/NAME $ZPM00, IN $ZHOME,
OUT $ZHOME, INSPECT SAVEABEND, PRI 146, NOWAIT, CPU 0/TCPIP
$ZTC00
Task 11: License SQL/MP Files
License certain SQL/MP files before DSM/SCM can run:
> VOLUME $SYSTEM.SYSTEM
> FUP LICENSE SQLCAT
> FUP LICENSE SQLUTIL
> FUP LICENSE SQLCOMP
Task 12: Configure and Start TMF
Use TMFCOM to configure and start TMF to all transactions to the SQL databases before DSM/SCM
can run:
~ DELETE TMF
~ SET AUDITTRAIL AUDITDUMP OFF
~ SET AUDITTRAIL FILESPERVOLUME 6
~ SET AUDITTRAIL FILESIZE 128
~ SET AUDITTRAIL ACTIVEVOLS ($AUDIT)
~ SET AUDITTRAIL MAT
~ START TMF
~ ADD DATAVOLS $DSMSCM, IGNOREPREVIOUSCONFIG
~ EXIT
Task 13: Create the System Catalog
Use SQLCI to create and initialize the system catalog before you can use DSM/SCM:
Recovering Installed Products Using SIT2SCM 207