HP Integrity NonStop H-Series - Manual (Page 132)

2. In the “Select Target - Receive Snapshot” window, use the left column to select a target from
which to receive the snapshot, then click Continue.
NOTE: A snapshot file contains information about all logical targets on a physical target
(NonStop system). If multiple logical targets are defined on the same physical target, select
any one of those logical targets.
3. In the “Receive Snapshot - physical_target_name” window, specify the file or tape drive location
of the snapshot file.
The Tape Drive option allows you to either select a tape drive from the drop-down list of tape
drives on the host, or to specify the name of a tape drive. You can also specify tape drives
on other Expand connected NonStop systems, as well as TAPESIM processes. The default tape
132 Performing a Build/Apply When Host and Target are not Expand-connected