HP Integrity NonStop H-Series - Manual (Page 230)

Specifying a DOCPRINT File’s Destination
Use the DOCPRINT function to indicate that the file is a softdoc or release document. To indicate
the file’s destination for a file with the DOCPRINT function, you must specify one of:
Meaning Document Type
File is either the PRODCAT or TIMESTMP file distributed by HP. RLSEDOC
File is a product-specific document. SOFTDOC
File is a document related to a specific RVU. ZRLSEDOC
1. In the DSV File Information dialog box, click DOCPRINT.... CNFGINFO displays the DOCPRINT
Destination dialog box.
2. Click the button next to the appropriate destination: SOFTDOC, RLSEDOC, or ZRLSEDOC.
3. Click OK. CNFGINFO returns to the DSV File Information dialog box.
Specifying System Generation Usage for the File
1. In the DSV File Information dialog box, click SYSGEN....CNFGINFO displays the SYSGEN
Usage dialog box, which shows a list of system generation options.
2. To select one of the listed options, click the corresponding button.
These options are mutually exclusive, except for SYSGEN COPY (copy file to SYSnn) and
SYSGEN PROCESS (system process file).
•
If you select System library file, you must also select a bind group number between 0
and 9.
• Entering a number in the priority field is not necessary for any systems running D40.00
or later RVUs.
3. After selecting the options, click OK. CNFGINFO returns to the DSV File Information dialog
box.
Table C-1 System Generation Options
Indicates that... Option
The file is downloadable controller millicode for the 3650/6100 family of
communications controllers and is to be placed on the CSSnn subvolume. Controller millicode file to CSSnn
The file is downloadable controller millicode to be placed on the SYSnn subvolume.
Used for controllers that are not type 3650/6100. Controller millicode file to SYSnn
A system generation program copies the file to the SYSnn subvolume on the target
system. Files in this subvolume are on the NEWPROCESS search path; for example,
ADDUSER. (Default) Copy file to SYSnn
The file is standard processor millicode. CPU (STDUCODE) millicode file
The file is an EMS template to be placed in the ZTEMPL TSV. EMS Template file to ZTEMPL
The file is used for dynamic-link libaries (DLL). System implicit library CORE
The file is used for dynamic-link libaries (DLL). System implicit library ETC
The file is used for dynamic-link libaries (DLL). The file is used for dynamic-link
libaries (DLL).
The file is used for dynamic-link libaries (DLL). System implicit library INIT
The file is used for dynamic-link libaries (DLL). System implicit library MCP
A system generation program binds the file into the system code or library segments
in OSIMAGE; for example, system-callable procedures and interrupt handlers. System library file
You must also indicate a bind group number between 0 and 9.
230 Running CNFGINFO