HP Integrity NonStop H-Series - Manual (Page 73)

4. Add database administrators for this host system. For more information, see “Setting Security
for Database Administrators” (page 57) .
5. Update the Configuration Manager Profile. For more information, see “Host Configuration
(Configuration Manager) Profile” (page 146) .
“Task 2: Configure the Host Database” (page 52)
Set Planner Security, as described in “Setting Security for Planners” (page 54) . ___
Update System Volume Usage, as described in “Updating the Volume Usage” (page 151) . ___
Set Host Database Administrator Security, as described in “Setting Security for Host Database Administrators
(NonStop Software Essentials)” (page 57)
___
Update the Configuration Manager Profile, as described in “Using NonStop Software Essentials to Update
the Host Configuration Profile” (page 146)
___
Task 3: Reconfigure the Target Database
Reinitializing a host system or target system removes all the default target system information in
the target database. You must reconfigure the target database to set the defaults for DSM/SCM
operations such as user security, file transfer, and scheduling options. Use the ZPHITMI to configure
DSM/SCM target database information:
1. Configure the target system profile. See “Target Profile” (page 149) .
2. Designate volumes to be used as scratch on this target system. See “Updating the Volume
Usage” (page 151) .
3. Add operators and database administrators for this target system. See “Setting Security for
Host or Target Database Administrators (ZPHIHMI or ZPHITMI)” (page 59) .
“Task 3: Configure the Target Database” (page 53)
Update the Target System Profile
Run the ZPHITMI:
> Volume $DSMSCM.ZDSMSCM
> RUN STARTSCM
> RUN ZPHITMI
___
Enter the dsmscmuser- id,
password, and press F1 Log on to the ZPHITMI ___
Enter 1 and press F1 Select System Maintenance ___
\targetname or
\hostname
If physical target system, enter target System Name. If host system, enter host
System Name ___
Set by HP. Enter Target System Site ID. To identify the site ID, see “Checking the Site ID”
(page 51)
___
TNSR Enter CPU Type: ___
TNSE = Intel Itanium ___
TNSR = RISC ___
TNS = CISC ___
\host name If physical target system, enter the host system that manages this target ___
Yes Tape Unload Flag set? Indicate whether DSM/SCM should unload tapes when
finished ___
No, leave unchecked. Safeguard Required Flag set? Indicate whether Safeguard must be running
whenever DSM/SCM places files ___
Yes Use network connection? ___
Managing the NonStop Software Management Configuration 73