HP Integrity NonStop H-Series - Manual (Page 140)

Resolve or Accept Discrepancies
Resolve the discrepancies.
1. Change the product list so that it matches the software on the target system. Include SPRs and
other software you have installed on the target system. (Any software you add to the list must
have already been received into the archive.)
2. Rerun the discrepancy report to see if all discrepancies are either resolved or considered
acceptable.
3. Repeat Steps 1 and 2until no discrepancies remain – or – you understand and want to proceed
despite the remaining discrepancies.
4. Perform another Build/Apply of the modified software revision.
5. Use ZPHIRNM to activate the new revision on the target.
140 Performing an Initialization Build/Apply