Space management troubleshooting, Software configuration troubleshooting, Migration troubleshooting – HP Integrity NonStop H-Series User Manual
Page 185
Column Head
Column Head
Use the ZPHIHMI to set the host system profile to Use
network connection.
STARTSCM has not yet run on the target:
An Apply is started from the host but does not start on the
target.
1.
Run STARTSCM.
2.
Use the ZPHITI to submit the Apply on the target using
the activation package location indicated in the EMS
message on the host.
Be sure to use network-accessible security when performing
installation activities for DSM/SCM.
Files on a network-connected system are not accessible.
Securities for certain activities must be set so files can be
accessed over a network because DSM/SCM is usually
used as a network-based application.
The SQL system catalog on the host system is not allowing
update access to the target system.
A target database stored on the host system is not updating.
Be sure to use network-accessible security when performing
installation activities for DSM/SCM.
Space Management Troubleshooting
Recovery
Problem
Not enough disk space was provided:
A file-system error 43 occurs on the ZDSMSCM volume
during file placement.
1.
Correct the problem using this PATHCOM command:
ALTER SERVER TA-001 PROCESS $process-name
(GUARDIAN-SWAP $new-volume)
2.
Restart the ZPHITI.
Not enough space is available on $SYSTEM for swap
space because DSM/SCM Database Manager files are
very large.
On a Database Relocation or INITENV, the SQLCOMP of
the database manager fails.
Make additional space available on $SYSTEM and try
again.
NonStop Software Essentials Client Connection Troubleshooting
•
Ensure ZNSE.HTTPSRVR is running.
•
Ensure the port on NonStop Software Essential logon screen is the same as the port in the
ZNSE.NSECONF file; or, is port 9988 if, ZNSE.NSECONF does not exist.
Software Configuration Troubleshooting
Migration Troubleshooting
Recovery
Problem
Between certain RVUs, PATHMON requires a cold start of the Pathway
configurations:
After you migrate between RVUs,
STARTSCM gives a Pathway error that
a cold start is required.
Space Management Troubleshooting 185