GW Instek PEL-3000 Series Programming Manual - Manual (Page 99)

COMMNAND OVERVIEW
97
:POWer:DUTY
Set
Query
Description Sets the duty cycle for the CP dynamic mode
switching frequency. This command along with
the “:POWer:FREQuency” command is used when
the dynamic time setting is set to “Freq./Duty”.
This command is only applicable for dynamic
mode.
Syntax :POWer:DUTY { | MINimum | MAXimum}
Query Syntax :POWer:DUTY?
Related
Commands :POWer:FREQuency
Parameter Sets the duty as a
percentage.
MINIMUM or MIN Minimum duty
MAXIMUM or MAX Maximum duty
Return parameter Returns the duty as a
percentage.
Example :POWer:DUTY 50
Sets the duty to 50%.
Query example :POWer:DUTY?
>50
Returns the duty (50%).