GW Instek PEL-3000 Series Programming Manual - Manual (Page 105)

COMMNAND OVERVIEW
103
Syntax :PROGram:RUN{SKIP|AUTO|MANual}
Query Syntax :PROGram:RUN? { Run:Skip|Automatic|Manual}
Parameter SKIP Sets the run state to skip
AUTO Sets the run state to automatic
MANual Sets the run state to manual
Return Parameter Run:Skip Run state = Skip
Run:Automatic Run state = Automatic
Run:Manual Run state = Manual
Example :PROGram:RUN SKIP
Skips the selected step.
Query example :PROGram:RUN?
>Run:Skip
Returns the “Run” state (skip).
:PROGram:ONTime
Set
Query
Description Sets or queries the On-Time for the selected step
number. Resolution 0.1 seconds.
Syntax :PROGram:ONTime {[s]}
Query Syntax :PROGram:ONTime?
Parameter [s] (0.1~60) On-Time in
seconds
Turns the On-Time off.
Return Parameter On-Time:
Example :PROGram:ONTime 1
Sets the On-Time to 1 second.
Query example :PROGram:ONTime?
>On-Time:1.0
Returns the On-Time (1 second).
:PROGram:OFFTime
Set
Query
Description Sets or queries the Off-Time for the selected step
number.