GW Instek PEL-3000 Series Programming Manual - Manual (Page 55)

COMMNAND OVERVIEW
53
Query Syntax [:CONFigure]:GNG:L?
Parameter Sets the low
voltage/current limit value
in volts/amps or in
percent.
Return parameter Returns the low
voltage/current limit value
in volts/amps or as %.
Example :GNG:L 10.0
Sets the low voltage limit value to 10%.
Query example :GNG:L?
>10.0
Returns the low voltage limit value as 10.0%.
[:CONFigure]:GNG:C
Set
Query
Description Sets or queries the center voltage/current limit
value. The center voltage limit value is used as the
center reference value when the entry mode is set
to percent ([:CONFigure]:GNG:Mode=PERCent).
Syntax [:CONFigure]:GNG:C
Query Syntax [:CONFigure]:GNG:C?
Parameter Sets the center
voltage/current limit value
in volts/amps.
Return parameter Returns the center
voltage/current limit value
in volts/amps.
Example :GNG:C 10.0
Sets the center voltage/current limit value to 10V or A.