GW Instek PEL-3000 Series Programming Manual - Manual (Page 45)

COMMNAND OVERVIEW
43
Example1 :OPP LIMIT
Sets the OCP setting to limit.
Example2 :OPP 10.000
Sets the OPP value to 10W.
Query example :OPP?
>LIMIT, 10.000
The OPP setting is LIMIT and the OPP value is
10.000W.
[:CONFigure]:UVP
Set
Query
Description Sets or queries the UVP trip settings. The UVP can
also be cleared with this command.
Syntax [:CONFigure]:UVP {[ V ] |MINimum |
MAXimum }
Query Syntax [:CONFigure]:UVP?
Parameter [V] voltage limit value.
MINIMUM or MIN
MINIMUM value.
MAXIMUM or MAX
MAXIMUM value.
Return parameter Returns the UVP level ()
Example1
:UVP 10.00
Sets the UVP setting to 10V.
Query example :UVP?
> 10.0000
The UVP setting is 10.0000V.
[:CONFigure]:OVP
Set
Query
Description Sets or queries the OVP trip settings. The OVP can
also be cleared with this command.
Syntax [:CONFigure]:OVP {[ V ] | MINimum|
MAXimum}