GW Instek PEL-3000 Series Programming Manual - Manual (Page 78)

PEL-3000 Programming Manual
76
Parameter [s] T1 timer setting in
seconds
MINIMUM or MIN Minimum time
MAXIMUM or MAX Maximum time
Return parameter Returns the T1 timer time
in seconds.
Example :CURRent:T1 0.200
Sets the T1 timer time to 200ms.
Query example :CURRent:T1?
>0.200
Returns the T1 timer time as 200ms.
:CURRent:T2
Set
Query
Description Sets the T2 timer settings for the CC dynamic
mode.
Syntax :CURRent:T2 {[s] | MINimum | MAXimum}
Query Syntax :CURRent:T2?
Related
Commands :CURRent:T1
Parameter [s] T2 timer setting in
seconds
MINIMUM or MIN Minimum time
MAXIMUM or MAX Maximum time
Return parameter Returns the T2 timer time
in secondes.
Example :CURRent:T2 0.200
Sets the T2 timer time to 200ms.
Query example :CURRent:T2?
>0.200
Returns the T2 timer time as 200ms.