GW Instek PEL-3000 Series Programming Manual - Manual (Page 77)

COMMNAND OVERVIEW
75
Example :CURRent:RISE MIN
Sets the rising slew rate to the minimum.
Query example :CURRent:RISE?
>5000
Returns the rising slew rate as 5000mA/us.
:CURRent:FALL
Set
Query
Description Sets the falling current slew rate for CC dynamic
mode.
Syntax :CURRent:FALL { | MINimum | MAXimum }
Query Syntax :CURRent:FALL?
Related
Commands :CURRent:FALL
Parameter Falling current slew rate
MINIMUM or MIN Minimum slew rate
MAXIMUM or MAX Maximum slew rate
Return parameter Returns the falling current
slew rate in mA/us.
Example :CURRent:FALL MIN
Sets the falling slew rate to the minimum.
Query example :CURRent:FALL?
>5000
Returns the falling slew rate as 5000mA/us.
:CURRent:T1
Set
Query
Description Sets the T1 timer settings for the CC dynamic
mode.
Syntax :CURRent:T1 {[s] | MINimum | MAXimum}
Query Syntax :CURRent:T1?
Related
Commands :CURRent:T2