GW Instek PEL-3000 Series Programming Manual - Manual (Page 102)

PEL-3000 Programming Manual
100
:PROGram
Set
Query
Description Configures the parameters for the Program
sequence. This remote command is equivalent to
all the settings in the “Timing Edit for Program”
menu when entering the FUNC>PROGRAM
menu.
Syntax :PROGram {,,,SKIP|AUTO|
MANual,,|OFF,|OFF,|OFF}
Query Syntax :PROGram?
Related
Commands :PROGram:STATe
Parameter Parameters (In order) Description
Program number (1~16)
Step number (1~16)
Memory number (1~256)
SKIP|AUTO|MANual Run parameter:
On-Time (0.1~60)s
|OFF Off-Time (0.1~60)s
|OFF P/F Time (0.0~119.9)s
|OFF Short-Time
(0.1 ~ On-Time)s
Return parameter Returns the program
settings in the following
order:
Program: ;
Start: , Step:XX,
Memory: , Run:
Skip|Automatic|Manual,
On-Time:,
Off-Time: |OFF,
P/F-Time: |OFF,
Short-Time: |OFF