GW Instek PEL-3000 Series Programming Manual - Manual (Page 145)

COMMNAND OVERVIEW
143
Query example :STATus:QUEStionable:EVENt?
> 1
Indicates an over voltage (OV) event has occurred.
:STATus:QUEStionable:NTRansition
Set
Query
Description Determines whether a negative transition (NTR
10) in the Questionable Status Condition register
will set the corresponding event in the
Questionable Status Event register.
The mask values are the bit weights of the
Questionable Status NTR filters. See page 154 for
details.
Syntax :STATus:QUEStionable:NTRansition
Query Syntax :STATus:QUEStionable:NTRansition?
Parameter/
Return Parameter Condition Condition
1 OV 512 UV
2 OC 1024 EXT
8 OP 2048 REV
16 OT All other
bits Not used
Example :STATus:QUEStionable:NTRansition 11
Configures the OV, OC and OP bits (Bits 1, 2, 3) in the
Questionable Status Condition register to set the
corresponding bits in the Questionable Status Enable
register on a negative transition
Query example
:STATus:QUEStionable:NTRansition?
>11
OV, OC and OP bits are configured to NTR in the
Questionable Status NTR filter.