GW Instek PEL-3000 Series Programming Manual - Manual (Page 36)

PEL-3000 Programming Manual
34
:INPut[:STATe]:TRIGgered
Set
Query
Description Turn ON/OFF the trigger input.
Syntax :INPut[:STATe]:TRIGgered {|OFF | ON }
Query Syntax :INPut[:STATe]:TRIGgered?
Parameter OFF or 0 Trigger input = OFF
ON or 1 Trigger input = ON
Return parameter 0 Trigger input = OFF
1 Trigger input = ON
Example :INPut:TRIGgered ON
Turns the on the trigger input.
Query example :INPut:TRIGgered?
>0
Indicates that the trigger input is turned off.
:INITiate[:IMMediate]
Set
Description Sets the trigger to the wait state. If the trigger is
activated, the trigger will automatically go to the
idle state.
Query Syntax :INITiate[:IMMediate]
:INITiate:CONTinuous
Set
Query
Description Sets or queries whether the trigger will go back to
the wait state or go to the idle state after a trigger.
When the :INITiate:CONTinuous function is set to
OFF, the trigger state can only be returned to idle if
the *RST or ABORt command is used
Syntax :INITiate:CONTinuous {|OFF | ON }
Query Syntax :INITiate:CONTinuous?
Parameter OFF or 0 Continuous = OFF
ON or 1 Continuous = ON