GW Instek PEL-3000 Series Programming Manual - Manual (Page 132)

PEL-3000 Programming Manual
130
:UTILity:INTerface
Set
Query
Description Sets or queries the remote interface. Settings only
take effect after restart.
Syntax :UTILity:INTerface {USB|RS232}
Query Syntax :UTILity:INTerface?
Parameter/
Return Parameter USB USB remote interface
RS232 RS2323 remote interface
Example :UTILity:INTerface RS232
Sets the interface to RS232.
Query example :UTILity:INTerface?
>RS232
The current remote interface is RS232.
:UTILity:BRATe
Set
Query
Description Sets the baud rate when the remote interface is set
to RS232. Settings only take effect after restart.
Syntax :UTILity:BRATe {}
Query Syntax :UTILity:BRATe?
Parameter/
Return Parameter 2400, 4800, 9600, 19200,
38400
Example :UTILity:BRATe 9600
Sets the baud rate to 9600.
Query example :UTILity:BRATe?
>9600
The baud rate is 9600.