GW Instek PEL-3000 Series Programming Manual - Manual (Page 116)

PEL-3000 Programming Manual
114
Example :NSEQuence:LLOad ON
Turns Last Load on.
Query example :NSEQuence:LLOad?
>Last Load: ON
Returns the last load state.
:NSEQuence:LAST
Set
Query
Description Sets or queries the value of Last Load when Last
Load = ON. The unit depends on the Mode.
Syntax :NSEQuence:LAST{}
Query Syntax :NSEQuence:LAST?
Parameter current value(CC), resistance
value(CR), voltage value(CV), power
value(CP).
Return Parameter Returns the value for the Last Load
in the following format:
Last:
Example :NSEQuence:LAST 1.000
Sets the value of Last Load to 1.000.
Query example :NSEQuence:LAST?
>Last: 1.000
Returns the value of Last Load.
:NSEQuence:CHAin
Set
Query
Description Sets or queries the next sequence in the chain.
Syntax :NSEQuence:CHAin {|OFF}
Query Syntax :NSEQuence:CHAin?
Parameter The sequence number of the next
sequence in the chain.
OFF End the chain at the current
sequence.