GW Instek PEL-3000 Series Programming Manual - Manual (Page 37)

COMMNAND OVERVIEW
35
Return parameter 0 Continuous = OFF
1 Continuous = ON
Example :INITiate:CONTinuous ON
Configures the trigger to go to the wait state after a
trigger.
Query example :INITiate:CONTinuous?
>1
Indicates that the trigger will to go to the wait state
after a trigger.
:CURRent[:VA]:TRIGgered
Set
Description Sets the current generated when the trigger is
activated.
Syntax :CURRent[:VA]:TRIGgered {[ A ] |MINimum |
MAXimum }
Parameter [ A ] Current in amps.
MINIMUM or MIN
MINIMUM value.
MAXIMUM or MAX
MAXIMUM value.
Example :CURRent:TRIGgered MAX
Sets the current generated to the maximum value.
:RESistance[:VA]:TRIGgered
Set
Description Sets the conductance for when the trigger is
activated.
Syntax :RESistance[:VA]:TRIGgered {[ mho ]
|MINimum | MAXimum }
Parameter [ mho ] Conductance in mho.
MINIMUM or MIN
MINIMUM value.
MAXIMUM or MAX
MAXIMUM value.