GW Instek PEL-3000 Series Programming Manual - Manual (Page 40)

PEL-3000 Programming Manual
38
Query example :INPut:SHORt?
>0
Indicates that the short function is off.
:INPut:MODE
Set
Query
Description Selects the load function mode.
Syntax :INPut:MODE{ LOAD|PROG|NSEQ|FSEQ }
Query Syntax :INPut:MODE?
Parameter/
Return parameter LOAD Sets the load to generator
as a CC/CV/CP/CR load.
PROG Sets the function mode to
program.
NSEQ Sets the function mode to
Normal Sequence mode.
FSEQ Sets the function mode to
Fast Sequence mode.
Example :INPut:MODE PROG
Puts the load generator into Program mode.
Query example :INPut:MODE?
>PROG
Indicates that the current function mode is Program.