GW Instek PEL-3000 Series Programming Manual - Manual (Page 148)

PEL-3000 Programming Manual
146
:STATus:OPERation:NTRansition
Set
Query
Description Determines whether a negative transition (NTR
10) in the Operation Status Condition register
will set the corresponding event in the Operation
Status Event register.
The mask values are the bit weights of the
Operation Status NTR filters. See page 155 for
details.
Syntax :STATus:OPERation:NTRansition
Query Syntax :STATus:OPERation:NTRansition?
Parameter/
Return Parameter Condition Condition
1 CAL All other
bits Not used
32 WTG
Example :STATus:OPERation:NTRansition 1
Configures the CAL bit (Bit 1) in the Operation Status
Condition register to set the corresponding bit in the
Questionable Status Enable register on a negative
transition
Query example
:STATus:OPERation:NTRansition?
>1
The CAL bit is configured to NTR in the Operation
Status NTR filter.
:STATus:OPERation:PTRansition
Set
Query
Description Determines whether a positive transition (PTR
01) in the Operation Status Condition register
will set the corresponding event in the Operation
Status Event register.
The mask values are the bit weights of the
Operation Status PTR filters. See page 155 for
details.