GW Instek PEL-3000 Series Programming Manual - Manual (Page 49)

COMMNAND OVERVIEW
47
Parameter/
Return parameter
OFF or 0 Turns the Count Time
timer off.
ON or 1 Turns the Count Time
timer on
Example [:CONFigure]:CNTime ON
Turns the Count Time timer on.
Query example [:CONFigure]:CNTime?
>ON
Count Time is turned on.
[:CONFigure]:COTime
Set
Query
Description Sets or queries the load cutoff time. A cutoff time
of 0 seconds is the equivalent of disabling the
cutoff time.
Syntax [:CONFigure]:COTime {[s] | MINimum |
MAXimum | OFF }
Query Syntax [:CONFigure]:COTime?
Parameter [s] Cut off time in seconds
(1~3599999)
OFF Turns the cutoff time off.
MINIMUM or MIN Sets the cutoff time to the
maximum
MAXIMUM or MAX Sets the cutoff time to the
minimum
Return parameter Returns the cutoff time
Example :COTime MAX
Sets the cutoff time to the maximum.
Query example :COTime?
>3599999
The cutoff time is set to3599999 seconds.