GW Instek PEL-3000 Series Programming Manual - Manual (Page 143)

COMMNAND OVERVIEW
141
:STATus:PRESet
Set
Description The :STATus:PRESet command resets the enable
registers NTR/PTR registers from Operation
Status, Questionable Status and CSummary Status
registers.
Preset Value Register Preset
Operation Status Enable All bits set to 1
Operation Status PTR All bits set to 1
Operation Status NTR All bits set to 0
Questionable Status Enable All bits set to 0
Questionable Status PTR All bits set to 1
Questionable Status NTR All bits set to 0
CSummary Status Enable All bits set to 0
CSummary Status PTR All bits set to 1
CSummary Status NTR All bits set to 0
Syntax :STATus:PRESet
:STATus:QUEStionable:CONDition?
Set
Query
Description Returns the status of the Questionable Status
Condition register. See page 154 for details.
Query Syntax :STATus:QUEStionable:CONDition?
Return parameter Condition Condition
1 OV 512 UV
2 OC 1024 EXT
8 OP 2048 REV
16 OT All other
bits Not used
Query example :STATus:QUEStionable:CONDition?
>1
Indicates an over voltage (OV) error has occurred.