GW Instek PEL-3000 Series Programming Manual - Manual (Page 64)

PEL-3000 Programming Manual
62
Example :STEP:CVL 0.001V
Sets the step resolution to 0.001V.
Query example :STEP:CVL?
> CVH:0.001
Returns the step resolution (0.001V).
[:CONFigure]:STEP:CV
Set
Query
Description Returns the step resolution for each CV Mode
range as a string.
Query Syntax [:CONFigure]:STEP:CV?
Return parameter Returns the CVH and CVL
step resolution settings.
Query example :STEP:CV?
>CVH:0.01, CVL:0.001
Returns the CV mode step resolution for each range.
[:CONFigure]:STEP:CPH
Set
Query
Description Configures the step resolution for CP High Range.
Note: The step resolution setting will be
automatically rounded to the closest multiple of
the base resolution.
Syntax [:CONFigure]:STEP:CPH {[ W ] | MINimum |
MAXimum }
Query Syntax [:CONFigure]:STEP:CPH?
Parameter [ W ] Step resolution.
MINIMUM or MIN Minimum step resolution
MAXIMUM or MAX Maximum step resolution
Return parameter Returns the range and the
step resolution.
Example :STEP:CPH 0.01
Sets the step resolution to 0.01W.