GW Instek PEL-3000 Series Programming Manual - Manual (Page 128)

PEL-3000 Programming Manual
126
Parameter Parameters in order: Description
Start_Value
End_Value
Start_Step
End_Step
Return parameter Returns the settings for
the Fill Edit for Fast
Sequence menu:
Start Value:, End
Value:, Start Step:
, End Step:
Example :FSEQuence:FILL 0.1,0.5,1,159
Fills the values of step 1 to step 159 gradually from
0.1A to 0.5A.
Query example :FSEQuence:FILL?
>Start Value:0.10000, End Value:0.50000, Start Step:1,
End Step:159
:FSEQuence:SAVE
Set
Description Saves the data points for the fast sequence.
Syntax :FSEQuence:SAVE
Example :FSEQuence:SAVE