GW Instek PEL-3000 Series Programming Manual - Manual (Page 150)

PEL-3000 Programming Manual
148
Syntax :STATus:CSUMmary:ENABle
Query Syntax :STATus:CSUMmary:ENABle?
Parameter/
Return Parameter Condition Condition
1 CC 256 PRUN
2 CR All other
bits Not used
4 CV
8 CP
Example :STATus:CSUMmary:ENABle 1
Enables the CC bit in the CSummary Status Enable
register.
Query example
:STATus:CSUMmary:ENABle?
>1
Indicates that the CC bit is enabled in the CSummary
Status Enable register.
:STATus:CSUMmary[:EVENt]?
Set
Query
Description Returns the status of the CSummary Status Event
register. The register is cleared upon reading. See
page 153 for details.
Query Syntax :STATus:CSUMmary[:EVENt]?
Return parameter Condition Condition
1 CC 256 PRUN
2 CR All other
bits Not used
4 CV
8 CP
Query example :STATus:CSUMmary:EVENt?
> 1
Indicates that the unit is in CC mode.
:STATus:CSUMmary:NTRansition
Set
Query
Description Determines whether a negative transition (NTR
10) in the CSummary Status Condition register
will set the corresponding event in the CSummary
Status Event register.