GW Instek PEL-3000 Series Programming Manual - Manual (Page 41)

COMMNAND OVERVIEW
39
Measurement Commands
:MEASure:CURRent? .......................................................... 39
:MEASure:VOLTage? .......................................................... 39
:MEASure:POWer? .............................................................. 39
:MEASure:ETIMe? ............................................................... 40
:MEASure:CURRent?
Set
Query
Description This command returns the load current.
Query Syntax :MEASure:CURRent?
Return parameter Load current in amps
Query example :MEASure:CURRent?
>0.79860
Returns the load current in amps.
:MEASure:VOLTage?
Set
Query
Description This command returns the load voltage.
Query Syntax :MEASure:VOLTage?
Return parameter Load voltage in volts
Query example :MEASure:VOLTage?
>1.49900
Returns the load voltage in volts.
:MEASure:POWer?
Set
Query
Description This command returns the power.
Query Syntax :MEASure:POWer?
Return parameter Power in watts
Query example :MEASure:POWer?
>1.19695
Returns the power in watts.