GW Instek PEL-3000 Series Programming Manual - Manual (Page 79)

COMMNAND OVERVIEW
77
:CURRent:FREQuency
Set
Query
Description Sets the CC dynamic mode switching frequency.
This command along with the “:CURRent:DUTY”
command is used when the dynamic time setting
is set to “Freq./Duty”.
This command is only applicable for dynamic
mode.
Syntax :CURRent:FREQuency { | MINimum |
MAXimum}
Query Syntax :CURRent:FREQuency?
Related
Commands :CURRent:DUTY
Parameter Sets the switching
frequency in hertz.
MINIMUM or MIN Minimum frequency
MAXIMUM or MAX Maximum frequency
Return parameter Returns the frequency in
hertz.
Example :CURRent:FREQuency 60
Sets frequency to 60Hz.
Query example :CURRent:FREQuency?
>60
Returns the switching frequency (60Hz).
:CURRent:DUTY
Set
Query
Description Sets the positive duty cycle for the CC dynamic
mode switching frequency. This command along
with the “:CURRent:FREQuency” command is
used when the dynamic time setting is set to
“Freq./Duty”.
This command is only applicable for dynamic
mode.