GW Instek PEL-3000 Series Programming Manual - Manual (Page 108)

PEL-3000 Programming Manual
106
Syntax [:PROGram]:CHAin
{|OFF, |OFF, |OFF, |OFF,
|OFF, |OFF, |OFF, |OFF,
|OFF, |OFF, |OFF, |OFF,
|OFF, |OFF, |OFF, |OFF}
Query Syntax [:PROGram]:CHAin?
Parameter Parameters in
order: Description
|OFF (1~16) Program no. that follows P01.
|OFF (1~16) Program no. that follows P02.
|OFF (1~16) Program no. that follows P03.
|OFF (1~16) Program no. that follows P04.
|OFF (1~16) Program no. that follows P05.
|OFF (1~16) Program no. that follows P06.
|OFF (1~16) Program no. that follows P07.
|OFF (1~16) Program no. that follows P08.
|OFF (1~16) Program no. that follows P09.
|OFF (1~16) Program no. that follows P10.
|OFF (1~16) Program no. that follows P11.
|OFF (1~16) Program no. that follows P12.
|OFF (1~16) Program no. that follows P13.
|OFF (1~16) Program no. that follows P14.
|OFF (1~16) Program no. that follows P15.
|OFF (1~16) Program no. that follows P16.
Return Parameter P1->XX;P2->XX;P3->XX;P4->XX;
P5->XX;P6->XX;P7->XX;P8->XX;
P9->XX;P10->XX;P11->XX;P12->XX;
P13->XX;P14->XX;P15->XX;P16->XX
Where XX = P1 ~ P16 or OFF
Example :CHAin 4,OFF,OFF,5,6,OFF,OFF,OFF,OFF,OFF,OFF,
OFF,OFF, OFF,OFF,OFF
Configures the program chain as follows:
P01→P04→P05→P06→OFF