GW Instek PEL-3000 Series Programming Manual - Manual (Page 125)

COMMNAND OVERVIEW
123
:FSEQuence:RPTStep
Set
Query
Description Sets or queries the last step number per loop.
Syntax :FSEQuence:RPTStep {}
Query Syntax :FSEQuence:RPTStep?
Parameter 1~1000
Return Parameter RPTSTEP:
Example :FSEQuence:RPTStep 11
Sets the RPTSTEP to 11.
Query example :FSEQuence:RPTStep?
> RPTSTEP: 11
Returns the RPTSTEP number.
:FSEQuence:EDIT
Set
Query
Description Configures the parameters for the Data Edit for
Fast Sequence menu, equivalent to entering the
FUNC>Sequence>Fast Sequence>Edit Sequence
menu.
Syntax :FSEQuence:EDIT
{,,,|OFF|ON}
Query Syntax :FSEQuence:EDIT?
Related
Commands :FSEQuence: