GW Instek PEL-3000 Series Programming Manual - Manual (Page 89)

COMMNAND OVERVIEW
87
Query Syntax :RESistance:FREQuency?
Related
Commands :RESistance:DUTY
Parameter Sets the switching
frequency in hertz.
MINIMUM or MIN Minimum frequency
MAXIMUM or MAX Maximum frequency
Return parameter Returns the frequency in
hertz.
Example :RESistance:FREQuency 60
Sets frequency to 60Hz.
Query example :RESistance:FREQuency?
>60
Returns the switching frequency (60Hz).
:RESistance:DUTY
Set
Query
Description Sets the positive duty cycle for the CR dynamic
mode switching frequency. This command along
with the “:RESistance:FREQuency” command is
used when the dynamic time setting is set to
“Freq./Duty”.
This command is only applicable for dynamic
mode.
Syntax :RESistance:DUTY { | MINimum | MAXimum}
Query Syntax :RESistance:DUTY?
Related
Commands :RESistance:FREQuency
Parameter Sets the duty as a
percentage.
MINIMUM or MIN Minimum duty
MAXIMUM or MAX Maximum duty
Return parameter Returns the duty as a
percentage.