GW Instek PEL-3000 Series Programming Manual - Manual (Page 75)

COMMNAND OVERVIEW
73
Syntax :CURRent:L2 {[ A ] | MINimum | MAXimum }
Query Syntax :CURRent:L2?
Parameter [A] “Level2” current value
MINIMUM or MIN Minimum current level
MAXIMUM or MAX Maximum current level
Return parameter Returns the “Level2”
current value.
Example :CURRent:L2 MIN
Sets the current value to the minimum.
Query example :CURRent:L2?
>1.0A
Returns the “Level2” current setting.
:CURRent:SET
Set
Query
Description Sets or queries the CC dynamic mode Set value
when the dynamic units are set to Percent.
This command is only applicable in dynamic
mode.
Syntax :CURRent:SET{[ A ] | MINimum | MAXimum }
Query Syntax :CURRent:SET?
Related
Commands :CURRent:LEVel
Parameter [A] “Set” current value
MINIMUM or MIN Minimum current level
MAXIMUM or MAX Maximum current level
Return parameter Returns the “Set” current
value.
Example :CURRent:SET MIN
Sets the current value to the minimum.
Query example :CURRent:SET?
>1.0A
Returns the “Set” current setting.