GW Instek PEL-3000 Series Programming Manual - Manual (Page 144)

PEL-3000 Programming Manual
142
:STATus:QUEStionable:ENABle
Set
Query
Description Sets which events are enabled in the Questionable
Status Enable register. The mask values are the bit
weights of the events. See page 154 for details.
Syntax :STATus:QUEStionable:ENABle
Query Syntax :STATus:QUEStionable:ENABle?
Parameter/
Return Parameter Condition Condition
1 OV 512 UV
2 OC 1024 EXT
8 OP 2048 REV
16 OT All other
bits Not used
Example :STATus:QUEStionable:ENABle 11
Events OV, OC and OP (Bits 1, 2, 3) are enabled in the
Questionable Status Enable register.
Query example
:STATus:QUEStionable:ENABle?
>11
Indicates that OV, OC and OP bits are enabled in the
Questionable Status Enable register.
:STATus:QUEStionable[:EVENt]?
Set
Query
Description Returns the status of the Questionable Status Event
register. The register is cleared upon reading. See
page 154 for details.
Query Syntax :STATus:QUEStionable[:EVENt]?
Return parameter Condition Condition
1 OV 512 UV
2 OC 1024 EXT
8 OP 2048 REV
16 OT All other
bits Not used