GW Instek PEL-3000 Series Programming Manual - Manual (Page 54)

PEL-3000 Programming Manual
52
Query example :GNG?
>GO
Returns the Go-NoGo test result.
[:CONFigure]:GNG:H
Set
Query
Description Sets or queries the high voltage/current limit
value. If the entry mode is set to value, the high
voltage/current limit value units are in
volts/amps. If the entry mode is set to percent, the
high voltage/current limit value units are in
percent.
Syntax [:CONFigure]:GNG:H
Query Syntax [:CONFigure]:GNG:H?
Parameter Sets the high
voltage/current limit value
in volts/amps or in
percent.
Return parameter Returns the high
voltage/current limit value
in volts/amps or as %.
Example :GNG:H 100.0
Sets the high voltage limit value to 100%.
Query example :GNG:H?
>100.0
Returns the high voltage limit value as 100.0%.
[:CONFigure]:GNG:L
Set
Query
Description Sets or queries the low voltage/current limit value.
If the entry mode is set to value, the low
voltage/current limit value units are in
volts/amps. If the entry mode is set to percent, the
low voltage/current limit value units are in
percent.
Syntax [:CONFigure]:GNG:L