GW Instek PEL-3000 Series Programming Manual - Manual (Page 76)

PEL-3000 Programming Manual
74
:CURRent:LEVel
Set
Query
Description Sets or queries the CC mode % level (percentage of
the Set current value) when the dynamic mode
units are set to Percent.
Syntax :CURRent:LEVel {| MINimum | MAXimum }
Query Syntax :CURRent:LEVel?
Related
Commands :CURRent:SET
Parameter “% level” current value
MINIMUM or MIN Minimum % current level
MAXIMUM or MAX Maximum % current level
Return parameter Returns the “% level”
current value.
Example :CURRent:LEVel MIN
Sets the % level current value to the minimum.
Query example :CURRent:LEVel?
>50
Returns the “% Level” as 50 percent.
:CURRent:RISE
Set
Query
Description Sets the rising current slew rate for CC dynamic
mode.
Syntax :CURRent:RISE { | MINimum | MAXimum }
Query Syntax :CURRent:RISE?
Related
Commands :CURRent:FALL
Parameter Rising current slew rate
MINIMUM or MIN Minimum slew rate
MAXIMUM or MAX Maximum slew rate
Return parameter Returns the rising current
slew rate in mA/us.