GW Instek PEL-3000 Series Programming Manual - Manual (Page 86)

PEL-3000 Programming Manual
84
Example :RESistance:LEVel MIN
Sets the % level conductance value to the minimum.
Query example :RESistance:LEVel?
>50
Returns the “% Level” as 50 percent.
:RESistance:RISE
Set
Query
Description Sets the rising current slew rate for CR dynamic
mode.
Syntax :RESistance:RISE { | MINimum | MAXimum }
Query Syntax :RESistance:RISE?
Related
Commands :RESistance:FALL
Parameter Rising current slew rate
[mA/us]
MINIMUM or MIN Minimum slew rate
MAXIMUM or MAX Maximum slew rate
Return parameter Returns the rising current
slew rate in mA/us.
Example :RESistance:RISE MIN
Sets the rising slew rate to the minimum.
Query example :RESistance:RISE?
>50.000
Returns the rising slew rate as 50mA/us.
:RESistance:FALL
Set
Query
Description Sets the falling current slew rate for CR dynamic
mode.
Syntax :RESistance:FALL { | MINimum | MAXimum }
Query Syntax :RESistance:FALL?