GW Instek PEL-3000 Series Programming Manual - Manual (Page 137)

COMMNAND OVERVIEW
135
:UTILity:CONTrast
Set
Query
Description Sets or queries the display contrast level.
Syntax :UTILity:CONTrast {NR1}
Query Syntax :UTILity:CONTrast?
Parameter/
Return Parameter 3~13 (low ~ high)
Example :UTILity:CONTrast 8
Sets the contrast to 8.
Query Example :UTILity:CONTrast?
>8
:UTILity:BRIGhtness
Set
Query
Description Sets or queries the display contrast level.
Syntax :UTILity:BRIGhtness {NR1}
Query Syntax :UTILity:BRIGhtness?
Parameter/
Return Parameter 50~90 (low ~ high)
Example :UTILity:BRIGhtness 70
Sets the contrast to 70.
Query Example :UTILity:BRIGhtness?
>70
:UTILity:LANGuage
Set
Query
Description Sets or queries the language. Note: English is the
only available language.
Syntax :UTILity:LANGuage {ENGLish}
Query Syntax :UTILity:LANGuage?