GW Instek PEL-3000 Series Programming Manual - Manual (Page 51)

COMMNAND OVERVIEW
49
Query example :CONFigue:DYNamic?
> Value,T1,T2
The dynamic mode becomes a value setup and timer
setup.
:CONFigure:MEMory
Set
Query
Description This command configures the how the files are
recalled in local mode (using the front panel
interface). By default when you try to recall a file
or setting from memory, a message will appear
asking you to press the Enter key to confirm each
time you wish to recall. This command enables
(SAFety) or disables this feature (DIRect).
Syntax :CONFigure:MEMory {SAFety | DIRect }
Query Syntax :CONFigure:MEMory?
Parameter SAFETY or SAF Safety setting.
DIRECT or DIR Directly recall the chosen
file.
Return parameter Safety Safety setting.
Direct Directly setting.
Example :CONFigure:MEMory SAFety
Enables the safety setting.
Query example :CONFigure:MEMory?
>Safety
The safety setting is enabled.
:CONFigure:SHORt
Set
Query
Description Configures the short key.
Syntax :CONFigure:SHORt { TOGGle | HOLD }
Query Syntax :CONFigure:SHORt?
Parameter HOLD Sets the button
configuration to hold