GW Instek PEL-3000 Series Programming Manual - Manual (Page 146)

PEL-3000 Programming Manual
144
:STATus:QUEStionable:PTRansition
Set
Query
Description Determines whether a positive transition (PTR
01) in the Questionable Status Condition register
will set the corresponding event in the
Questionable Status Event register.
The mask values are the bit weights of the
Questionable Status PTR filters. See page 154 for
details.
Syntax :STATus:QUEStionable:PTRansition
Query Syntax :STATus:QUEStionable:PTRansition?
Parameter/
Return Parameter Condition Condition
1 OV 512 UV
2 OC 1024 EXT
8 OP 2048 REV
16 OT All other
bits Not used
Example :STATus:QUEStionable:PTRansition 11
Configures the OV, OC and OP bits (Bits 1, 2, 3) in the
Questionable Status Condition register to set the
corresponding bits in the Questionable Status Enable
register on a positive transition.
Query example
:STATus:QUEStionable:PTRansition?
>11
OV, OC and OP bits are configured to PTR in the
Questionable Status PTR filter.
:STATus:OPERation:CONDition?
Set
Query
Description Returns the status of the Operation Status
Condition register. See page 155 for details.
Query Syntax :STATus: OPERation:CONDition?
Return parameter Condition Condition
1 CAL All other
bits
32 WTG